The fibre-modified Weber floor 4310 fibre flow floor levelling compound by Saint-Gobain Weber is the solution to fast and efficient renovation of existing floors and floating floor construction in domestic and commercial applications.
Weber,floor 4310 fibre flow is a pump-applied screed formulated from special cements, aggregates, binders and chemical admixtures that can be applied at depths between 5 – 50mm. It is supplied as a casein-free pre-blended dry powder and is suitable for levelling concrete, lightweight concrete, wooden boards, existing tiles and under-floor heating systems.
Supplied in 25kg polythene-lined paper sacks the screed has a pot life of 20 minutes after adding water. This high performance screed has low alkalinity and low emissions.
weber,floor 4310 can be covered after 1-3 weeks following installation depending on layer thickness and drying conditions, with ceramic and terrazzo tiles, carpet, flexible floor coverings and parquet, and it is suitable for heated and wooden floors.
After thorough cleaning, the substrate should be prepared with weber.floor 4716 primer to improve adhesion and prevent the formation of air bubbles. For floating floors weber.floor 4945 fibre mesh is recommended.